CNC Breakout Board adapter for PC Stepper Motor Driver
CNC interface board, you can make your computer into a powerful CNC controller!
-
5 axis Breakout board
-
Compatible: KCAM4 MACH EMC2
-
Built in DB25 male connector.
- It is with 4-wire limit switch to insure our safty movement
- It is with relay port to contro the cnc spindle
- Working voltage is 5VDC and support with MACH3,EMC2,KCAM4 software
- Size:9x5.7cm
ราคา 790 บาท
|
DB25 control pin (PIN) |
The pin of the drive board |
Comment |
|
1 |
STEPB |
B(Fifth axis)pulse signal |
|
2 |
STEPX |
X(First axis) pulse signal |
|
3 |
DIRX |
X(First axis) direction of the signal |
|
4 |
STEPY |
Y(Secondaxis)pulse signal |
|
5 |
DIRY |
Y(Second axis)direction of the signal |
|
6 |
STEPZ |
Z(Third axis) pulse signal |
|
7 |
DIRZ |
Z(Third axis) direction of the signal |
|
8 |
STEPA |
A(Fourth axis) pulse signal |
|
9 |
DIRA |
A(Fourth axis) direction of the signal |
|
10 |
LIMIT-1 |
Limit input interface 1 |
|
11 |
LIMIT-2 |
Limit input interface 2 |
|
12 |
LIMIT-3 |
Limit input interface 3 |
|
13 |
LIMIT-4 |
Limit input interface 4 |
|
14 |
DIRB |
B(Fifth axis) direction of the signal |
|
15 |
Vacant |
|
|
16 |
RLY |
Relay control |
|
17 |
EN |
All axis enable |
|
18-25 |
GND |
GND |