เครื่อง mini CNC แกะสลักตัดชิ้นงาน ขนาด 30x40 ซม.
*** รุ่น CNC3040Z-DQ ***
ราคา 52,000 บาท
อบรมการใช้งานเครื่อง ฟรี 1 วัน สอนการตั้งค่า การทดลองกัดชิ้นงานจริง
สอนการเขียน CAD เพื่อนำมาตัดหรือ แกะชิ้นงาน
CD of manual and software MACH3 are attached
with QGG(plain vice) for free
Introduction
The 3040Z-DQ Easily produce name badges, equipment tags, small signs, plaques and awards, gift items, pet tags,ID tags, electrical tags, military name tags, desk plates, or mark industrial parts.
More Precise Stepping Motor
The engraving process is visible as controlled by computer
Simple operation and installation
1 year machine part and 6 months electrical parts,stepping motor,spindle Free Warranty
Better than 3040T-DJ
|
Technical Parameters
|
Machine Dimensions:
|
615X485X390mm
|
|
Rack material:
|
6061 and 6063 Hard aluminum alloy
(The unique and dedicated mold extrusion profiles, Let counterfeiters dwarfs.)
|
|
Engraving area:
|
400X300mm
|
|
Z-Axis Stroke:
|
55mm, Engraving depth depends on the length of the tool edge)
|
|
Acceptable material thickness:
|
≤70mm
|
|
Rail type:
|
Chromeplate shaft+Linear Bearings,)(Surface hardening 61HRC)
|
|
Type of screw:
|
Ball screw,Pitch 4mm
|
|
Spindle motor:
|
230W/11000r/min((Very small noise))
|
|
Collet type:
|
ER11,1/8"(3.175mm) Collet
|
|
Stepper motor and drive:
|
two-phase hybrid stepping motor , 1.8A/PHASE,40N.cm, 8 segments drive.
|
|
Maximum operating speed:
|
4000mm/min (Engraving speed :300-3000mm/min)
|
|
Repeat positioning Accuracy:
|
0.04mm
|
|
Communication interface:
|
Parallel port (Must use the desktop computer, Does not support laptop)
|
|
Software Compatability:
|
Mach3/Emc2/Kcam, (Type3,Wentai, ArtCAM,coppercam)
|
|
Command code:
|
G code/.nc/.ncc/.tab/.txt
|
|
Machine weight:
|
28kg
|
|
Can add the 4th axis;
|
|
|
The information as below:
|
|
|
Rotation Axis (4th Axis)
Description:
|
Chuck Size: 65mm self-centering chuck
Center height: H = 55mm
Clamping diameter: 65mm or less
Deceleration mode: synchronous wheel / belt
Deceleration ratio: 3:1
Stepper motor: 57 type / 1.5A
Stepper Drive: T65-axis drive
Positioning accuracy: 0.075 °
|
       
 
QGG Pics:
|
Packing list:
1× Engraving machine
1× Control box
1× Parallel port cable 25pin
1× Power cable
1× Tool box and tools
3× Axis motors
1× CD of manual and software MACH3 (if not get, may be lost in customs, please contact us)
1× QGG
