CNC spindle motor spindle bit water cooling 220VAC
ราคา 4900 บาท
Basic parameters:
-
Size: 80x180mm(Middle body diameter:80mmxLength:180mm)
-
Material: 304 stainless steel jacket, water jacket is pressure cast aluminum tubes, high temperature copper coil
-
Speed Ways: Through the inverter output voltage and adjust the operating frequency can be achieved 0-24000 stepless
-
Cooling: Water cooling mode
-
Power Interface: Optional GX16 waterproof air plug, there are marked 1234,123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground
-
Power: 1.5Kw
-
Voltage: 220VAC
-
Current: 6A
-
Frequency: 0-400Hz
-
Speed: 0-24000rpm
-
Runout Off: Less than 0.01mm
-
3pcs bearings
-
Diameter(mm): 80
-
Bearing Type: 2×7002C P4 DT &1×7000C P4 D
-
Collet: ER11
-
Clip Knifediameter: 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm (standard 6mm)
-
Water Cooling ER11 collet chunk
-
Grease Lubrication
-
Main Application: Engrave for Wood,bamboo,normal PCB,PVC,PMMA,plastic,bamboo,duotone board(ABS) and etc nonmetal,also can engrave on gold,silver,copper,aluminium,Pb etc soft metal surface working,but not milling working.
